onemesh 500
New onemesh 500 sizes according to the new Rewinforcing Steel Standard AS 4671
  Mesh Specification Approx mass of
2.4m x 6m sheets
Cross-sectional area
Product
Code
Longitudinal Wires Cross Wires     Longitudinal
Wires
Cross
Wires
  No x Size
mm
@ Pitch No x Size
mm
@ Pitch Area
kg/m2
Sheet
kg/m2
mm2/m mm2/m
Rectangular Meshes
RL1218 25 X 11.90 @ 100   30 X 7.60 @ 200 10.5 157 1112 227
RL1118 25 X 10.70 @ 100   30 X 7.60 @ 200 8.8 130 899 227
RL1018 25 X 9.50 @ 100 30 X 7.60 @ 200 7.3 109 709 227
RL918* 25 X 8.60 @ 100   30 X 7.60 @ 200 6.3 93 581 227
RL818* 25 X 7.60 @ 100 30 X 7.60 @ 200 5.3 79 454 227
RL718* 25 X 6.75 @ 100   30 X 7.60 @ 200 4.6 67 358 227
Square Meshes with edge lapping wires
SL102 10 X 9.50 @ 200 30 X 9.50 @ 200 5.6 80 354 354
  +4 X 6.75 @ 100      
SL92 10 X 8.60 @ 200   30X 8.60 @ 200 4.6 66 290 290
  +4 X 6.00 @ 100                
SL82 10 X 7.60 @ 200 30 X7.60 @ 200 3.6 52 227 227
  +4 X 6.00 @ 100      
SL72 10 X 6.75 @ 200   30 X 6.75 @ 200 2.8 41 179 179
  +4 X 500 @ 100                
SL62 10 X 6.00 @ 200 30 X 6.00 @ 200 2.2 33 141 141
  +4 X 500 @ 100      
SL52* 10 X 5.00 @ 200   30 X 5.00 @ 200 1.5 23 98 98
  +4 X 400 @ 100                
SL63 (WA) 6 X 6.00 @ 300 30 X 6.00 @ 300 1.5 21 94 94
  +4 X 400 @ 100 (2.3 m sheet width)  
SL53 (WA) 6 X 5.00 @ 300   30 X 5.00 @ 300 1 15 65 65
  +4 X 400 @ 100         (2.3 m sheet width)    
Square Meshes
SL81 25 X7.60 100 60 X 7.60 100 7.1 105 454 454
Trench Meshes strip widths 200mm, 300mm, 400mm
L12TM 3,4 or 5 X  11.90 @ 100 5.00 @ 300    
L11TM 3,4 or 5 X  10.70 @ 100 5.00 @ 300    
L8TM 3,4 or 5 X    7.60 @ 100   5.00 @ 300        
NOTES:Smaller diameter edge wires on SL meshes may be used if they meet the minimum ductility requirements of the Standard and the combined cross-sectional area of the two edge wires is equal to or greater then the cross-sectional area of the longitudinal wire. Trench mesh cross wires may be reduced in diameter to 4.77mm and 4.24mm for L12/L11 and L8 respectively, provided they meet the ductility requirements of AS4671. * Available on request.

back to Other useful information